SCDC 4" UV DTF Sticker – Premium Weatherproof Club Decal

Show your SCDC pride anywhere with our 4-inch UV DTF sticker for crisp detail, vibrant colour and a raised, premium finish. Designed for vehicles, boards, bottles, laptops, toolboxes, and any smooth surface, these decals deliver long-lasting durability with 2–3 years outdoor life thanks to their UV‑resistant varnish layer.

Perfect for club members, supporters, and limited‑run drops.

Features

• 4" diameter – ideal for vans, windows, panels, and gear

• UV DTF technology – ultra-sharp print with a tough, glossy varnish

• Weatherproof – rain, sun, and wash-safe

• Universal adhesion – sticks to metal, plastic, glass, powder coat, and more

• Raised premium feel – tactile, high-end finish

Application Instructions

1. Clean the surface Wipe with isopropyl alcohol or a mild cleaner. Ensure the area is dry and dust-free.

2. Burnish the transfer Press firmly over the front of the sticker to ensure the adhesive grips the carrier film.

3. Peel the backing film Slowly peel the backing at a low angle to keep the sticker flat and prevent lifting.

4. Apply the sticker Position it, then press down from the centre outward to remove air pockets.

5. Final press Rub firmly around the edges to lock the adhesive.

Removal Instructions (Including Vehicle-Safe Removal)

1. Warm the decal gently Use a hairdryer on low heat, keeping it 10–15 cm away from the surface. This softens the adhesive without overheating the paint or clear coat.

2. Start from an edge Lift a corner with your fingernail or a plastic scraper (avoid metal tools). Pull the sticker back slowly at a low angle (almost parallel to the surface). This reduces stress on the paint and helps the adhesive release cleanly.

3. Work in short sections If you feel resistance, pause and apply a little more heat. Avoid pulling quickly or at a steep angle, as this can shock older paintwork.

4. Remove adhesive residue safely For vehicles, use one of the following:

• Isopropyl alcohol (IPA) – safe for clear coat when used sparingly

• Citrus-based adhesive remover – gentle and paint-safe

• Warm soapy water – for light residue

Apply with a microfibre cloth, not paper towels, to avoid micro-scratches.

5. Protect the area afterwards Once clean, apply a quick coat of spray wax or detailer to restore gloss and protection to the clear coat.